The British Columbia Building Code | Section 4.5. | Objectives and Functional Statements Pt 2
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
Section 4.5. Objectives and Functional Statements
4.5.1. Objectives and Functional Statements
4.5.1.1. Attributions to Acceptable Solutions
1) For the purpose of compliance with this Code as required in Clause1.2.1.1.(1)(b)of DivisionA, the
objectives and functional statements attributed to the acceptable solutions in this Part shall be the objectives and
functional statements listed in Table4.5.1.1. (See NoteA-1.1.2.1.(1).)
Table 4.5.1.1.
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
4.1.1.3. Design Requirements
(1) [F20-OS2.1]
(2) [F22-OP2.4]
[F22-OH4]
(3) [F20-OS2.1] Applies to structural members where temporary overloading during construction may result in impairment of that or any other
member.
(4) [F20,F80,F82-OS2.1]
(5) [F20-OP2.1] [F22-OP2.4]
[F20-OS2.3,OS2.4]
4.1.1.5. Design Basis
(2) [F20-OS2.1] [F22-OS2.4,OS2.5]
[F20-OP2.1] [F22-OP2.4,OP2.5]
[F22-OH4]
4.1.2.1. Loads and Effects
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(2) [F20-OS2.1]
(3) [F20-OS2.1]
4.1.2.2. Loads Not Listed
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.3.2. Strength and Stability
(1) [F20-OP2.1] [F22-OP2.4]
[F20-OS2.1]
(2) [F20-OS2.1]
[F22-OS2.4,OS2.5] Applies to the stabilizing resistance of the dead load.
[F20-OP2.1] [F22-OP2.4,OP2.5]
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
(3) [F20-OS2.1]
[F22-OS2.4,OS2.5] Applies to the stabilizing resistance of the dead load.
[F20-OP2.1] [F22-OP2.4,OP2.5]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1] [F22-OS2.4,OS2.5]
[F20-OP2.1] [F22-OP2.4,OP2.5]
(8) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(9) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(11) [F20-OS2.1] [F22-OS2.4,OS2.5]
(12) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.3.3. Fatigue
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1,OP2.4] [F22-OP2.4]
[F22-OH4]
4.1.3.4. Serviceability
(1) [F22-OP2.4]
[F22-OH4]
4.1.3.5. Deflection
(1) (b),(c),(d) [F22-OP2.4]
[F22-OP2.4]
[F22-OH4]
(2) [F22-OS2.3,OS2.4]
[F22-OP2.4]
(3) [F22-OP2.4]
(5) [F22-OS2.3,OS2.4]
[F22-OP2.3,OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
4.1.3.6. Vibration
(1) [F22-OP2.4]
[F22-OH4]
(2) [F20-OS2.1]
[F20-OP2.1,OP2.4] [F22-OP2.4]
[F22-OH4]
4.1.4.1. Dead Loads
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1] [F22-OS2.4,OS2.5]
4.1.5.1. Loads Due to Use of Floors and Roofs
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.5.2. Uses Not Stipulated
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.5.3. Full and Partial Loading
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.5.4. Loads for Occupancy Served
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.5.5. Loads on Exterior Areas
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.5.7. More Than One Occupancy
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.5.8. Variation with Tributary Area
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.5.9. Concentrated Loads
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.5.10. Sway Forces in Assembly Occupancies
(1) [F20-OS2.1]
[F20-OP2.1,OP2.4]
4.1.5.11. Crane-Supporting Structures and Impact of Machinery and Equipment
(1) [F20-OS2.1]
[F20-OP2.1,OP2.4] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1,OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1,OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1,OP2.4]
4.1.5.12. Bleachers
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.4]
4.1.5.13. Helicopter Landing Areas
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
4.1.5.14. Loads on Guards
(1) [F20-OS2.1]
(2) [F20-OS2.1]
(3) [F20-OS2.1,OS2.4]
(4) [F22-OS2.4]
(6) [F20-OS2.1]
(7) [F20-OS2.1]
4.1.5.15. Loads on Vehicle Guardrails
(1) [F20-OS2.1]
4.1.5.16. Loads on Walls Acting As Guards
(1) [F20-OS2.1]
4.1.5.17. Firewalls
(1) [F20-OS1.2]
[F20-OP1.2]
[F20-OP3.1]
(2) [F04-OS1.2]
[F04-OP1.2]
[F04-OP3.1]
4.1.6.2. Specified Snow Load
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(8) [F20-OS2.1] Applies to portion of Code text: “The shape accumulation factor, C
a
, shall be 1.0, …”
[F20-OP2.1] [F22-OP2.4] Applies to portion of Code text: “The shape accumulation factor, C
a
, shall be 1.0,…”
(a) to (e) [F20-OS2.1] Applies to roof shapes and configurations that call for a higher shape accumulation factor.
(a) to (e) [F20-OP2.1] [F22-OP2.4] Applies to roof shapes and configurations that call for a higher shape accumulation factor.
(9) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.1.6.3. Full and Partial Loading
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.4. Specified Rain Load
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.5. Multi-level Roofs
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.6. Horizontal Gap between a Roof and a Higher Roof
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.7. Areas Adjacent to Roof Projections
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.8. Snow Drift at Corners
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.9. Gable Roofs
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.10. Arch Roofs, Curved Roofs and Domes
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(9) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.11. Snow Loads Due to Sliding
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.12. Valleys in Curved or Sloped Roofs
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.13. Specific Weight of Snow
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.6.14. Snow Removal
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.1.6.15. Ice Loading of Structures
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.7.1. Specified Wind Load
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.7.2. Classification of Buildings
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.7.3. Static Procedure
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(8) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(10) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.7.4. Topographic Factor
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.7.5. External Pressure Coefficients
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(5) [F20-OS2.1]
4.1.7.6. External Pressure Coefficients for Low Buildings
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(8) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(9) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.7.7. Internal Pressure Coefficient
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
4.1.7.8. Dynamic Procedure
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.7.9. Full and Partial Wind Loading
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
4.1.7.10. Interior Walls and Partitions
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.7.11. Exterior Ornamentations, Equipment and Appendages
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.7.12. Wind Tunnel Procedure
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
[F22-OH4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.1.8.1. Analysis
(2) (a) [F20-OS2.1]
(a) [F20-OP2.1,OP2.3] [F22-OP2.4]
(b) [F20-OS2.1]
(b) [F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1,OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(8) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(9) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(10) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(11) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(12) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(13) [F20-OS2.1]
[F20-OP2.3] [F22-OP2.3,OP2.4]
(14) [F20-OS2.1]
[F20-OP2.3] [F22-OP2.3,OP2.4]
4.1.8.3. General Requirements
(2) [F20-OS2.1]
[F20-OP2.1,OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(8) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.4. Site Properties
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(9) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.5. Importance Factor
(1) [F20-OS2.1]
[F20-OP2.1,OP2.3] [F22-OP2.4]
4.1.8.6. Structural Configuration
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.7. Methods of Analysis
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.8. Direction of Loading
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.1.8.9. SFRS Force Reduction Factors, System Overstrength Factors, and General Restrictions
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.10. Additional System Restrictions
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) (a) [F20-OP2.3] [F22-OP2.4]
(b) [F20-OP2.3] [F22-OP2.4]
(c) [F20-OP2.3] [F22-OP2.4]
(d) [F20-OP2.3] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(7) [F22-OS2.3,OS2.4]
[F22-OP2.3,OP2.4]
(8) [F22-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.11. Equivalent Static Force Procedure for Structures Satisfying the Conditions of Article 4.1.8.7.
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(8) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(9) (a) [F20-OS2.1]
(a) [F20-OP2.1] [F22-OP2.4]
(b) [F20-OS2.1]
(b) [F20-OP2.1] [F22-OP2.4]
(10) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(11) (a) [F20-OP2.1] [F22-OP2.4]
(a) [F20-OS2.1]
(b) [F20-OS2.1]
(b) [F20-OP2.1] [F22-OP2.4]
(12) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.12. Dynamic Analysis Procedure
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) (a) [F20-OS2.1]
(a) [F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1,OP2.3] [F22-OP2.4]
(7) [F20-OS2.1]
[F20-OP2.1,OP2.3] [F22-OP2.4]
(8) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(9) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(10) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(12) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.1.8.13. Deflections and Drift Limits
(1) [F22-OS2.3,OS2.4]
[F22-OP2.3,OP2.4]
(2) [F22-OS2.3,OS2.4]
[F22-OP2.3,OP2.4]
(3) [F22-OS2.3,OS2.4]
[F22-OP2.3,OP2.4]
4.1.8.14. Structural Separation
(1) [F22-OS2.3,OS2.4]
[F22-OP2.3,OP2.4]
[F22-OP4.3]
(2) [F20-OS2.1,OS2.3,OS2.4]
[F20-OP2.1,OP2.3,OP2.4]
[F20-OP4.3]
(3) [F20-OS2.1,OS2.3,OS2.4]
[F20-OP2.1,OP2.3,OP2.4]
[F20-OP4.3]
(4) [F20-OS2.1,OS2.3,OS2.4]
[F20-OP2.1,OP2.3,OP2.4]
[F20-OP4.3]
4.1.8.15. Design Provisions
(1) [F20-OS2.1]
[F20-OP2.1,OP2.3,OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1,OP2.3,OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1,OP2.3,OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1,OP2.4]
(6) [F20-OS2.1,OS2.4]
[F20-OP2.1,OP2.4]
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
4.1.8.16. Foundation Provisions
(1) [F22-OS2.3,OS2.4]
[F22-OP2.3,OP2.4]
(2) [F20-OS2.1] Applies to portion of Code text: “Foundations shall be designed to resist the lateral load capacity of the SFRS…”
[F20-OP2.1] Applies to portion of Code text: “Foundations shall be designed to resist the lateral load capacity of the SFRS…”
(5) [F20-OS2.2,OS2.4]
[F20-OP2.2,OP2.4]
(6) (a) [F22-OS2.4]
(a) [F22-OP2.4]
(b) [F22-OS2.4]
(b) [F22-OP2.4]
(c) [F20-OS2.4]
(c) [F20-OP2.4]
(7) [F20-OS2.1]
[F20-OP2.1,OP2.4]
(8) (a) [F20-OS2.1]
(a) [F20-OP2.1]
(b) [F22-OS2.4]
(b) [F22-OP2.4]
(9) [F20-OS2.4]
[F20-OP2.4]
(10) [F20-OS2.2] [F22-OS2.4]
[F20-OP2.2] [F22-OP2.4]
4.1.8.17. Site Stability
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.18. Elements of Structures, Non-structural Components and Equipment
(1) [F20,F22-OS2.4]
[F20-OP2.3] [F22-OP2.3,OP2.4]
(4) [F20,F22-OS2.4]
[F20,F22-OP2.3,OP2.4]
(5) [F20,F22-OS2.1]
[F20,F22-OP2.1,OP2.4]
(6) [F20,F22-OS2.4]
[F20,F22-OP2.3,OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
(7) [F20,F22-OS2.4] Applies to portion of Code text: “Connections to the structure of elements and components listed in Table 4.1.8.18. shall be
designed to support the component or element for gravity loads, shall conform to the requirements of Sentence 4.1.8.18.(1) …”
[F20,F22-OP2.3,OP2.4] Applies to portion of Code text: “Connections to the structure of elements and components listed in Table 4.1.8.18.
shall be designed to support the component or element for gravity loads, shall conform to the requirements of Sentence 4.1.8.18.(1) …”
(a) [F20,F22-OS2.4]
(a) [F20,F22-OP2.3,OP2.4]
(b),(c) [F20,F22-OS2.4]
(b),(c) [F20,F22-OP2.3,OP2.4]
(d) [F20,F22-OS2.4]
(d) [F20,F22-OP2.3,OP2.4]
(e) [F20,F22-OS2.4]
(e) [F20,F22-OP2.3,OP2.4]
(9) [F22-OS2.3,OS2.4]
[F22-OP2.3,OP2.4]
(10) [F22-OS2.1,OS2.3,OS2.4]
[F22-OP2.1,OP2.3,OP2.4]
(11) [F20-OS2.1] [F22-OS2.4]
[F20,F22-OP2.3,OP2.4]
(12) [F20-OS2.1] [F22-OS2.3]
[F20-OP2.1] [F22-OP2.3]
(14) [F22-OS2.4]
(16) [F20,F22-OS2.4]
[F20-OP2.3] [F22-OP2.3,OP2.4]
4.1.8.19. Seismic Isolation
(2) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.20. Seismic Isolation Design Provisions
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(2) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
(4) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(7) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(9) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(10) [F22-OS2.4]
[F22-OP2.3,OP2.4]
4.1.8.21. Supplemental Energy Dissipation
(2) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.1.8.22. Supplemental Energy Dissipation Design Considerations
(1) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(3) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(4) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(5) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(6) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
(7) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
(8) [F20-OS2.1] [F22-OS2.4]
[F20-OP2.1] [F22-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.2.2.1. Subsurface Investigation
(1) [F20-OS2.2,OS2.6] [F21-OS2.6]
[F20-OP2.2] [F21-OP2.6]
[F21-OP4.1,OP4.4]
4.2.2.3. Field Review
(1) [F20-OS2.2,OS2.6] [F21-OS2.6]
[F20-OP2.2] [F21-OP2.5]
[F21-OP4.1,OP4.4]
4.2.2.4. Altered Subsurface Condition
(1) [F20-OS2.2,OS2.6] [F21-OS2.6]
[F20-OP2.2] [F21-OP2.6]
[F21-OP4.1,OP4.4]
(2) [F20-OS2.2,OS2.6] [F21-OS2.6]
[F20-OP2.2] [F21-OP2.6]
[F21-OP4.1,OP4.4]
4.2.3.2. Preservation Treatment of Wood
(1) [F80-OS2.3]
[F80-OP2.3]
(2) [F82-OS2.3]
[F82-OP2.3]
4.2.3.4. Prevention of Deterioration of Masonry
(1) [F80-OS2.3]
[F80-OP2.3]
4.2.3.6. Protection Against Chemical Attack
(1) [F80-OS2.3]
[F80-OP2.3]
4.2.3.8. Steel Piles
(1) [F20-OS2.3]
[F20-OP2.3]
4.2.3.9. High Strength Steel Tendons
(1) [F20,F80-OS2.5,OS2.6]
[F20,F80-OP2.6,OP2.5]
[F20,F80-OP4.1,OP4.4]
4.2.3.10. Corrosion of Steel
(1) [F80-OS2.3]
[F80-OP2.3]
[F80-OP4.1]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
4.2.4.1. Design Basis
(1) [F20-OS2.2,OS2.6] [F21-OS2.6]
[F20-OP2.2] [F21-OP2.5]
[F21-OP4.1,OP4.4]
(5) [F21-OS2.5]
[F21-OP2.4,OP2.5]
4.2.4.2. Subsurface Investigation
(1) [F20-OS2.2,OS2.6] [F21-OS2.6]
[F20-OP2.2] [F21-OP2.6]
[F21-OP4.1,OP4.4]
4.2.4.3. Identification
(1) [F20-OS2.2,OS2.6] [F21-OS2.6]
[F20-OP2.2] [F21-OP2.6]
[F21-OP4.1,OP4.4]
4.2.4.4. Depth of Foundations
(1) [F21-OP2.4] Applies to portion of Code text: “… the bearing surface of a foundation shall be below the level of potential damage, including
damage resulting from frost action …”
[F21-OP2.4] Applies to portion of Code text: “… the foundation shall be designed to prevent damage resulting from adfreezing and frost
jacking.”
(2) [F21-OP2.4]
4.2.4.5. Sloping Ground
(1) [F21-OS2.2]
[F21-OP2.2,OP2.6,OP2.4]
4.2.4.6. Eccentric and Inclined Loads
(1) [F20-OS2.1,OS2.2]
[F20-OP2.1,OP2.2,OP2.4]
4.2.4.7. Dynamic Loading
(1) [F20-OS2.2]
[F20-OP2.2,OP2.6,OP2.4]
[F20-OH4]
4.2.4.8. Hydrostatic Uplift
(1) [F22-OP2.1,OP2.4]
4.2.4.9. Groundwater Level Change
(1) [F21-OP4.1]
4.2.4.10. Permafrost
(1) [F20-OS2.2] [F21-OS2.5]
[F20-OP2.2,OP2.4] [F21-OP2.6,OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.2.4.11. Swelling and Shrinking Soils
(1) [F21-OP2.6,OP2.4]
4.2.4.12. Expanding and Deteriorating Rock
(1) [F21-OP2.6,OP2.4]
4.2.4.13. Construction on Fill
(1) (a) [F20-OS2.2] [F21-OS2.5]
(b) [F20-OP2.2,OP2.4] [F21-OP2.6,OP2.4]
(c) [F01-OS1.1]
4.2.5.2. Excavation Construction
(1) [F21-OP4.1]
(2) [F20-OS2.6]
[F20-OP2.3]
[F20,F21-OP4.1]
4.2.5.3. Supported Excavations
(1) [F20-OS2.6]
[F21-OP4.1]
4.2.5.4. Unsupported Excavations
(1) [F20-OS2.6]
[F21-OP4.1]
4.2.5.5. Control of Water around Excavations
(1) [F60-OS2.6]
[F60-OP4.1,OP4.4]
4.2.5.6. Loss of Ground
(1) [F21-OP4.1]
4.2.5.7. Protection and Maintenance at Excavations
(1) [F80-OS2.6]
[F80-OP4.1]
4.2.5.8. Backfilling
(1) (a) [F21-OS2.1]
(a) [F21-OP2.1,OP2.4]
[F21-OP4.1]
(2) [F21-OP2.4]
4.2.6.2. Support of Shallow Foundations
(1) [F20-OS2.2]
[F20-OP2.2,OP2.4] [F21-OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Division B: Acceptable Solutions Part 4 – Structural Design
British Columbia Building Code 2018 Revision 2.01 Division B
4.2.6.3. Incorrect Placement of Shallow Foundations
(1) [F20-OS2.2]
[F20-OP2.2,OP2.4] [F21-OP2.4]
4.2.6.4. Damaged Shallow Foundations
(1) [F20-OS2.1]
[F20-OP2.1,OP2.4] [F22-OP2.4]
4.2.7.2. Design of Deep Foundations
(3) [F20-OS2.1,OS2.2] [F21-OS2.5]
[F20-OP2.1,OP2.2] [F21,F22-OP2.4]
(5) [F20-OS2.1]
[F20-OP2.1,OP2.4] [F22-OP2.4]
(6) [F20-OP2.1,OP2.4]
4.2.7.3. Tolerance in Alignment and Location
(1) [F20-OS2.1]
[F20-OP2.1,OP2.4] [F22-OP2.4]
4.2.7.4. Incorrect Alignment and Location
(1) [F20-OS2.1]
[F20-OP2.1,OP2.4] [F22-OP2.4]
4.2.7.5. Installation of Deep Foundations
(1) [F81-OS2.1] [F21-OS2.2,OS2.6]
(c) [F21-OP4.1]
(a),(b) [F81-OP2.1,OP2.4] [F21-OP2.2,OP2.4]
4.2.7.6. Damaged Deep Foundation Units
(1) [F20-OS2.1]
[F20-OP2.1] [F22-OP2.4]
4.2.8.2. Use of Existing Foundations
(1) [F20-OS2.1,OS2.2]
[F20-OP2.1,OP2.2] [F22-OP2.4]
4.3.1.1. Design Basis for Wood
(1) [F22,F21,F80-OH4]
[F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F21,F22-OP2.4] [F80-OP2.3,OP2.4]
(2) [F22,F21,F80-OH4]
[F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F21,F22-OP2.4] [F80-OP2.3,OP2.4]
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.3.1.2. Glued-Laminated Members
(1) [F20-OS2.1]
[F20-OP2.1] [F21,F22-OP2.4]
[F21,F22-OH4]
4.3.2.1. Design Basis for Plain and Reinforced Masonry
(1) [F21,F22,F80-OH4]
[F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F22,F21-OP2.4] [F80-OP2.3,OP2.4]
4.3.3.1. Design Basis for Plain, Reinforced and Pre-stressed Concrete
(1) [F20-OS2.1] [F80,F81-OS2.3]
[F20-OP2.1] [F21,F22-OP2.4] [F80,F81-OP2.3,OP2.4]
[F21,F22,F80,F81-OH4]
4.3.4.1. Design Basis for Structural Steel
(1) [F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F20,F22-OP2.4] [F80-OP2.3,OP2.4]
[F22,F80-OH4]
4.3.4.2. Design Basis for Cold-Formed Steel
(1) [F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F20,F22-OP2.4] [F80-OP2.3,OP2.4]
[F22,F80-OH4]
4.3.5.1. Design Basis for Aluminum
(1) [F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F20,F22-OP2.4] [F80-OP2.3,OP2.4]
[F22,F80-OH4]
4.3.6.1. Design Basis for Glass
(1) [F20-OS2.1]
[F20-OP2.1]
4.4.1.1. Design Basis for Air-Supported Structures
(1) [F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F22-OP2.4] [F80-OP2.3]
[F22-OH4]
4.4.2.1. Design Basis for Parking Structures and Repair Garages
(1) [F21,F61,F80-OS2.3]
[F21,F61,F80-OP2.3,OP2.4]
[F21,F61,F80-OH4]
Notes to Table4.5.1.1.:
(1) See Parts 2 and 3 of Division A.
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)
Part 4 – Structural Design Division B: Acceptable Solutions
Division B Revision 2.01 British Columbia Building Code 2018
4.3.1.2. Glued-Laminated Members
(1) [F20-OS2.1]
[F20-OP2.1] [F21,F22-OP2.4]
[F21,F22-OH4]
4.3.2.1. Design Basis for Plain and Reinforced Masonry
(1) [F21,F22,F80-OH4]
[F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F22,F21-OP2.4] [F80-OP2.3,OP2.4]
4.3.3.1. Design Basis for Plain, Reinforced and Pre-stressed Concrete
(1) [F20-OS2.1] [F80,F81-OS2.3]
[F20-OP2.1] [F21,F22-OP2.4] [F80,F81-OP2.3,OP2.4]
[F21,F22,F80,F81-OH4]
4.3.4.1. Design Basis for Structural Steel
(1) [F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F20,F22-OP2.4] [F80-OP2.3,OP2.4]
[F22,F80-OH4]
4.3.4.2. Design Basis for Cold-Formed Steel
(1) [F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F20,F22-OP2.4] [F80-OP2.3,OP2.4]
[F22,F80-OH4]
4.3.5.1. Design Basis for Aluminum
(1) [F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F20,F22-OP2.4] [F80-OP2.3,OP2.4]
[F22,F80-OH4]
4.3.6.1. Design Basis for Glass
(1) [F20-OS2.1]
[F20-OP2.1]
4.4.1.1. Design Basis for Air-Supported Structures
(1) [F20-OS2.1] [F80-OS2.3]
[F20-OP2.1] [F22-OP2.4] [F80-OP2.3]
[F22-OH4]
4.4.2.1. Design Basis for Parking Structures and Repair Garages
(1) [F21,F61,F80-OS2.3]
[F21,F61,F80-OP2.3,OP2.4]
[F21,F61,F80-OH4]
Notes to Table4.5.1.1.:
(1) See Parts 2 and 3 of Division A.
Table 4.5.1.1. (continued)
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 4
Forming Part of Sentence 4.5.1.1.(1)
Functional Statements and Objectives
(1)